![]() ![]() The system would freeze randomly and a hard reset was required, which rendered working with that system a pain if not impossible. I was experiencing the same issue on a ThinkCentre m900 SFF with a i7-6700 CPU. Now you will be able to boot into Ubuntu without an issue. Just use any 4:3 ratio screen resolution. Also, don’t use any 16:9 resolution as GRUB seems to have issues with those. The last line is your preferred resolution, otherwise GRUB will use the maximum UHD resolution that is hard to read. You will need to edit /etc/initramfs-tools/modules file by running sudo nano /etc/initramfs-tools/modules and add these two modules to booting process: i195Ĭhange the grub2 booting options by running sudo nano /etc/default/grub and editing these lines: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i915.preliminary_hw_support=1" 4.4.2)įirst, you will need to upgrade your kernel to 4.4.2 to support both wifi and Intel i915 graphics: wget /backup/kernel-4.4.2 20 models.ĭownload the latest stable kernel (e.g. Go to POST Behavior -> Fastboot and set to Thorough.Īdditionally (after the install), you can change General -> Boot Sequence to whatever order you prefer and add GRUB2 – choosing EFI/ubuntu/grub圆4.efi.Īfter the installation of Ubuntu (or any other Linux is done), update it to the latest kernel to make wifi work on Dell XPS13 (9350), e.g. Go to Secure Boot -> Secure Boot Enable and switch to Disabled. Go to System Configuration -> SATA Operation and change to AHCI. Go to General -> Advanced Boot Options and set to disable all. Press F2 on booting (while the Dell logo is displayed) and enter the UEFI BIOS. ![]() Linux UEFI Installation on Dell XPS13 (9350) To ensure smooth and working booting via GRUB, you will need to enable some modules and update GRUB2 parameters. To enable wifi you need the latest (4.4+) kernel. To install Ubuntu (Kubuntu or any other distro or flavor), you will need an UEFI-enabled Linux distro. If you have the latest Dell XPS13 Touch (9350) with Skylake and Intel Graphics i915 running Ubuntu 15.10 (or any other version such as 15.04 or 16.04), you will need to make some changes to make it boot safely without running into the black screen issues. I have written a manual for the black screen boot issues and enabling working wi-fi for Ubuntu 15.10: We all hope Intel fixes the pstate / cstate / thermald issues plaguing many of us in the LTS kernel release. Please note kernel version 4.9 LTS will be out soon. you fudged to make earlier kernels and drivers work. Instead of kernel 4.2, 4.3 or 4.4.2 in the other answers here you should upgrade to kernel 4.8.10 which has good reviews / improvments: cd /tmpĪfter installing the new kernel you can try to roll out grub command line changes for nomodeset, i915.preliminary_hw_support=1, etc. ![]() See the answer here: ( Ubuntu 16.04 Skylake overheating) Steps everyone can take are to ensure Intel microcode is up to date. This new release includes a microcode update from Intel for the following CPUs.New kernel version 4.8.10 (November 23, 2016) Intel recently announced that it has completed software validations and has started to release new microcode for current CPU platforms in reaction to the following threats:ĬVE-2019-11091 – Microarchitectural Data Sampling Uncacheable Memory (MDSUM)ĬVE-2018-12126 – Microarchitectural Store Buffer Data Sampling (MSBDS)?ĬVE-2018-12127 – Microarchitectural Load Port Data Sampling (MLPDS)ĬVE-2018-12130 – Microarchitectural Fill Buffer Data Sampling (MFBDS)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |